
The maximum-effort wearable, offered on two batteries. Two brushless motors drive dual air inlets into dual outlets, ten speed levels replace the usual five, and an LED display shows the remaining charge as a number rather than a blinking guess. The 10,000mAh build reaches a combined 16,000RPM for 19.8CFM, is rated for up to 20 hours on low and fills in four to five hours; the 20,000mAh build doubles all of it — 32,000RPM, 39.6CFM, up to 40 hours, seven to eight hours to charge. Both keep a bottom intake so the air path stays straight under clothing, and both sit in twin manganese-steel clamps with a silicone cover that keeps the whole thing planted on a work belt.
Opens the authorised listing for the size you selected. The price here is re-checked regularly; the binding price is the one at checkout.
On the hottest days the difference is coverage. Single-outlet fans cool a stripe; two intake paths feeding two outlets cool a region, with the streams overlapping across chest and back instead of drawing one cold line. It is the closest a wearable gets to standing in front of a desk fan while both hands stay on the work.
Ten gears give unusually fine control. The low end is an office breeze a meeting will not notice; the top end is genuinely windy, the kind of output you step down from rather than up to. In between sits the real value — the exact noise-to-airflow balance a situation allows, rather than the nearest of five approximations.
The numeric display removes the guesswork that plagues battery fans. Instead of three dots that mean anything between fine and dying, there is a figure. Which figure you start from is the choice between the two packs: the smaller one is lighter and fills in four to five hours, the larger one doubles both the airflow and the reserve and stretches toward forty hours on the lowest setting.
The trade-off is heft, and it is worth stating plainly: the big pack takes seven to eight hours to charge and puts real weight on a thin belt. Owners treat it as equipment rather than an accessory — filled overnight next to the boots, clipped on for a full shift, held by twin steel clamps inside a silicone sleeve that keeps it where it was put.
Two motors on every build; the large pack reaches 32,000RPM and 39.6CFM — the strongest wearable airflow here.
Twice the granularity of the standard fans: dial in the exact noise and airflow you can live with.
A readout replaces vague indicator dots, so mid-shift surprises stop happening.
Two inlet and outlet pairs spread air across a wider band of the torso.
Up to 20 hours on the smaller pack, up to 40 on the larger — a double shift either way at mid speed.
Foundry floors, commercial kitchens, asphalt crews — places where single-motor clip fans tap out by lunch. Twin turbines keep a felt breeze going through the shift, and the readout says how much shift is left in the pack.
Pick the large pack and sixteen hours on the middle gears sits inside its comfort zone. Charge overnight, wear through both shifts, and the display means the second one never starts on a guess.
Off the belt it stands on a bench as a two-stream personal fan; ten speeds suit a quiet office as readily as a wood shop, and in that role it goes days between charges.